Archive for the ‘High Temp Metals’ Category
Saturday, February 9th, 2008
This article continued discussion on time-dependent deformation and fracture of structural materials at elevated temperatures, by analyzing:
* effects of fracture at elevated temperatures
* environmental conditions
* creep rupture data presentation and
* damage accumulation and life prediction.
Fracture at Elevated Temperatures
The constant load creep rupture test is the basis for design data for ...
Posted in High Temp Metals | Comments Off
Friday, July 20th, 2007
The commercial airline sector has been in financial turmoil in the past year, and the reduction in new aircraft manufacturing has negatively affected the consumption of specialty and high-temp alloys, such as titanium, chromium and nickel.
According to a report in the December 13 edition of Manufacturing News, civil aviation sales ...
Posted in High Temp Metals | No Comments »
Friday, July 20th, 2007
When local leaders learned Canon USA was eyeing the Garden State, the Suffolk Industrial Development Agency offered up to $35 million in tax breaks to keep Canon here. Now, Babylon's IDA is working overtime to lure Hi-Temp Specialty Metals Inc.'s headquarters from Willingboro, N.J., to Deer Park.
The economic development group ...
Posted in High Temp Metals | No Comments »
Friday, July 20th, 2007
The aerospace industry is the bull in the high-temp and titanium alloy markets. If aerospace is asleep, any bull market in specialty metals is dead to the world, too. But put a bit of spark into aircraft, and the bull starts shaking in the specialty metals market.
Like Sleeping Beauty, the ...
Posted in High Temp Metals | No Comments »
Friday, July 20th, 2007
CHICAGO - Prices for high-temperature alloy scrap remained firm in a pair of recent sales by the Defense Reutilization and Marketing Service. Some scrap industry sources attributed this to the recent upsurge in world prices for cobalt metal, especially for superalloys with both nickel and cobalt.
Even small lots of cobalt ...
Posted in High Temp Metals | No Comments »
Friday, July 20th, 2007
Special Metals hikes high-temp alloys
PITTSBURGH--Special Metals Corp. late last week said that it was hiking the price of its high-temperature alloy products by about 4.5 percent across the board effective with orders Friday.
The New Hartford, N.Y.,-based producer of high-temperature long products attributed the increase to rising raw materials costs, including ...
Posted in High Temp Metals | No Comments »
Friday, July 20th, 2007
Resbond 940 series of 3,000[degrees]F ceramic adhesives is available in various grades of thermal expansion, as machinable, metallic-based, and electrically or thermally conductive. Able to adhere to quartz, cordierite, fused silica, glassware, ceramics, and metals, product cures in 4-8 hr at room temperature or in 5 min at 175[degrees]F. Adhesives, ...
Posted in High Temp Metals | No Comments »
Thursday, March 2nd, 2006
Steels can be classified by a variety of different systems depending on:
The composition, such as carbon, low-alloy or stainless steel.
The manufacturing methods, such as open hearth, basic oxygen process, or electric furnace methods.
The finishing method, such as hot rolling or cold rolling
The product form, such as bar plate, sheet, strip, ...
Posted in Stainless Steel, Steels, High Temp Metals | No Comments »